Description : Jotun mega Filler Smooth

 Two-pack,  light weight, low density epoxy filler for high film thickness: Up to 30 mm on big areas with minor effect on the total weight of the boat. Very easy to sand, Must be recoated with epoxy primer.

Ref:20157

€ 193.44

Colour

Size

Quantity:

Description : Jotun Megagloss

Two-pack polyurethane with excellent gloss and colour retention, exceptional hardness and abrasion resistance. Professional finish can be achieved even with roller and brush due to very good levelling properties. Unlimited colour range.

Ref:21658

€ 74.10

Colour

Size

Quantity:

Description : Jotun Easy Gloss

One-pack enamel based on urethane alkyd binders, giving very good application properties when applied by roller or brush. Very glossy finish and good abrasion resistance while keeping good flexibility. Ideal for wooden boats. Limited colour range.

Ref:93929

€ 40.14

Colour

Size

Quantity:

Description : Jotun Antipest

Two-pack epoxy suitable as a long exposure undercoat for epoxy and polyurethane systems and designed to prevent osmosis in fibreglass boats. Can be used as primer on all types of substrates including steel, fibreglass, aluminium and marine timber as well as intermediate adhesion undercoat for polyurethane or antifouling on top of epoxy primers. Ideal for priming gelcoat before applying antifouling

Ref:12243

€ 53.30

Colour

Size

Quantity:

Description : jotun Vinyl primer

One-pack, quick drying vinyl modified primer and sealer with aluminium pigments for increased water resistance. Good adhesion to wood and old antifouling.

Ref:13652

€ 30.27

Colour

Size

Quantity:

Description : Jotun Mega Filler  Multi

 Two-pack epoxy filler for finishing jobs. Can be applied up to 3 mm film thickness, leaving a very smooth surface without pores or holidays. Easy to sand and provides a very smooth and uniform surface. Low absorption of water or humidity, but must be sealed with an epoxy paint. Suitable to prevent and repair damages of osmosis.

Size/weight: 4.00lt

Ref:78534

€ 194.20

Colour

Quantity:

Description : Jotun Osmoshell

Two-pack solvent free epoxy coating reinforced with glass flakes providing very high structural strength and superior adhesion to polyester substrates. Excellent abrasion and water resistance. Specially designed for osmosis treatment, but it is also suitable for bilge protection thanks to its very high chemical resistance. Can also be applied on metal substrates.

Size/weight: 2.5lt

Ref:86117

€ 243.38

Colour

Quantity:

Description : Jotun Ravilakk

Glossy, quick drying varnish providing a professional and exceptional hard finish with a slightly yellowish, golden tone. UV filters prevent darkening of the surface.

Size/weight: 1lt

Ref:35043

€ 43.10

Colour

Quantity:

Description : Jotun Megaprimer

Megaprimer is a multiple use, fast drying two component epoxy primer for professional use on leisure yachts - above and below the waterline. It is easy to sand to a smooth surface and an excellent undercoat for Mega Gloss topcoat.

Ref:

€ 50.90

Colour

Size

Quantity:

Description : Jotun Easy Primer

EasyPrimer is a fast drying and easy to use one component alkyd primer for leisure yachts. Very good hiding power and sanding properties make it ideal for EasyGloss topcoat

Ref:

€ 31.27

Colour

Size

Quantity:

Description : Jotam,astic 87 Aluminium

This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. It is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat

Ref:

€ 97.70

Colour

Size

Quantity:

Description : Jotam,astic  Smart pack

This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids product.Specially designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage.Specially designed for areas where optimum surface preparation is not possible or required. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments

Ref:

€ 197.32

Colour

Size

Quantity: